Photography menu – FujiFilm E510 User Manual
Page 24
47
Advanced
Features
3
ç PHOTOMETRY
Available Photography mode:
Use this setting for scenes where the brightness of
the subject and background differ markedly so that
the MULTI setting is unlikely to achieve the desired
result.
) MULTI (Pattern):
Light metering where the camera assesses the
scene and selects the optimum exposure.
_ SPOT:
Light metering where the exposure is optimized
for the center of the image.
●
!
In the “
B
”, “
m
”, “
,
”, “
.
”, “
/
” and “
r
” modes, light
metering is fixed at the MULTI setting and cannot be
changed.
A WHITE BALANCE
Available Photography mode:
Change the white balance setting to take a picture
with the white balance fixed for the surroundings
and lighting.
In AUTO mode, the correct white balance may not
be achieved for subjects such as close-ups of
people’s faces and pictures taken under a special
light source. Select the correct white balance for
the light source. See P.110 for more information on
the white balance.
AUTO: Automatic adjustment
(shooting to show the ambience of
the light source)
6
: Shooting outdoors in good weather
7
: Shooting in shade
9
: Shooting under “Daylight” fluorescent
lamps
0
: Shooting under “Warm White”
fluorescent lamps
-
: Shooting under “Cool White”
fluorescent lamps
8
: Shooting in incandescent light
✽ When the flash fires, the white balance setting for the flash is used. Consequently, to achieve a particular effect, the
flash mode should be set to Suppressed flash (
➡P.40).
●
!
The color tones may vary depending on the shooting conditions (light source, etc.).
46
A countdown appears on the LCD monitor indicating
the time remaining until the picture is taken.
Self-timer mode is cancelled after each shot.
4
1
The self-timer is used in situations where the
photographer is included in the shot.
When setting the self-timer to “ON”, “*” appears
on the LCD monitor.
In this mode, a timer runs for about 10 seconds
before the shutter is released.
1 Position the AF frame over the subject.
2 Press the shutter button down halfway to focus
the subject.
3 Without releasing the shutter button, press the
button all the way down (fully pressed) to start
the self-timer.
Bebeep
Beep
2
0
1
0
2
0
3
●
!
Any of the following cancels the self-timer setting:
i Completing the shooting
i Changing the Mode dial setting
i Setting the camera to Playback mode
i Turning the camera off
●
!
The AF/AE lock can be used (
➡P.21).
●
!
Take care not to stand in front of the lens when pressing the
shutter button as this can avoid the correct focus or
brightness (exposure) from being achieved.
The self-timer lamp lights steadily for about 5
seconds and then blinks for another 5 seconds,
and then the picture is taken.
3
●
!
To stop the self-timer, once it has started running, press the
“BACK (DISP)” button.
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
◆
The photometry modes are effective for the following subjects
◆
h MULTI
In this mode, the camera uses automatic scene recognition to analyze the subject and provide
optimum exposure in a wide range of shooting conditions. This mode should be used for everyday
photography.
h SPOT
This mode is useful for subjects with strongly contrasting light and dark areas where you want to
achieve the correct exposure for a particular feature.
✽ Displaying the menus (➡P.45)
* SELF-TIMER PHOTOGRAPHY
Available Photography mode: