FujiFilm E510 User Manual

Page 43

Viewing

Images

Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.

●

Press the “BACK (DISP)” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately. Printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.

6.2.2 Specifying images for printing without using DPOF (single-frame printing)

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER

— PictBridge FUNCTION

●

Press the “MENU/OK” button to download the data
to the printer and start printing the specified
number of prints.
To end printing, press the “BACK (DISP)” button.

1Check that “

” is not displayed on the

camera’s screen.

2Turn the camera off. Unplug the USB cable.

◆

Disconnecting the printer

◆

(USB) socket

●

“PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.

1 Press “a” or “b” to select “PRINT WITH DATE”

or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.

2 Press the “MENU/OK” button.

●

Movie images cannot be printed.

1 Press “d” or “c” to display the frame (file) for

which you want to specify PRINT settings.

2 Press “a” or “b” to set a value up to 99 as the

number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).

To specify more PRINT settings, repeat steps 1
and 2.
3 Always press the “MENU/OK” button after the

settings are completed.

AC-3V (sold separately)

(USB) socket

1 Connect the camera to the printer using the USB

cable (included).

2 Turn the printer on.

1 Set the Mode switch to “w”.
2 Press the “POWER” button to turn the camera

on.

“s” appears and then the menu is
displayed on the LCD monitor.

●

If the menu does not appear, check whether the USB mode
setting is

“

”.

●

Depending on the printer, some functions are disabled.

●

The camera cannot be used to specify printer settings such
as the paper size and print quality.

●

Please connect the AC Power Adapter AC-3V (sold
separately) or AC-3VW (included with optional PictureCradle
CP-FXA10) to your camera.

●

Use an xD-Picture Card that was formatted in the camera.

1 Press the “POWER” button to turn the camera

on.

2 Select “®” in “USB MODE” in the SET-UP

menu (

➡P.69).

3 Press the “POWER” button to turn the camera

off.

●

Do not connect to a PC when the USB mode setting is set to
“

”. See P.105 if you connect to PC by mistake.