FUJITSU Siemens CELCIUS M/V/R - Manual (Page 29)

Operation
A26361-K990-Z120-1-7619, Edition 6 21
Working with floppy disks
i
Follow the instructions supplied by the vendor of the floppy disks.
Do not clean the floppy disk drive with cleaning floppy disks. Any attempt would destroy
the read/write head in the disk drive within 20 seconds.
3
2
1
5
6
4
7
3 = Write protection tab for a 1.44 MB floppy disk
4 = Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk
To insert a floppy disk
►
Push the floppy disk into the drive in the insertion direction (1) until it engages. The label should
be facing upward.
To remove a floppy disk
►
Push the eject button (5).
Protect the floppy disk against being overwritten or erased
►
Slide the write-protect slider (3) into position (6). The hole is now visible.
The disk is write-protected.
Deactivate write protection
►
Slide the write-protect slider (3) into position (7). The hole is now covered.
The disk is not write-protected.