FUJITSU Solaris PCI GigabitEthernet 3.0 - Manual (Page 61)

Chapter 4 LinkAggregation Feature
- Description
Inactivate the LinkAggregation group.
- Exit code
0 : normal end.
>0 : error end.
- Example
Inactivate the LinkAggregation group with aggregator-interface = fjgi0.
# /etc/opt/FJSVla/bin/fjla term fjgi0
# FJ LinkAggregation stop.
● When aggregator-interface is inactivated (unplumb), it cannot perform that fjla term
if not specify aggregator-interface name. In this case, please specify
aggregator-interface name.
4.2.2.3 Display Status and Statistics (fjla stat)
This section explains the fjla stat command for displaying the LinkAggregation status and
statistic.
- Synopsis
/etc/opt/FJSVla/bin/fjla stat [ aggregator-interface ] [-i interval ]
aggregator-interface : Aggregator interface name (including instance number)
-i interval (s) : Specify the display interval in seconds (maximum:4294967295). The command
displays the statistics during the specified period. However, the first report shows
statistics accumulated since the group is activated.
If
aggregator-interface is not specified, information for all LinkAggregation groups will
be displayed. If interval is not specified (or "-i 0" is specified), the command only shows
the first report.
- Description
Display the status and statistics of specified aggregator-interface.
- Exit code
0 :normal end.
>0 :error end.
54