FUJITSU Solaris PCI GigabitEthernet 3.0 - Manual (Page 35)

Chapter 3 Setting Configuration Information
file.
example)
# grep fjgi /etc/path_to_inst
"/pci@83,2000/FJSV,pwga@1" 0 "fjgi" - PRIMEPOWER250/450 secondary LAN port
"/pci@15,2000/FJSV,pgtb@1" 1 "fjgi" - PW008GE5, PW0G8GE2
"/pci@17,2000/FJSV,pgsb@1" 2 "fjgi" - PW008GE4, PW0G8GE1
"/pci@83,4000/pci@3/FJSV,p4ta@1" 3 "fjgi"
"/pci@83,4000/pci@3/FJSV,p4ta@1,1" 4 "fjgi" PW008QG1
"/pci@83,4000/pci@3/FJSV,p4ta@3" 5 "fjgi"
"/pci@83,4000/pci@3/FJSV,p4ta@3,1" 6 "fjgi"
● In the above example:
device node of device tree instance number driver name
/pci@83,2000/FJSV,pwga@1 0 fjgi
/pci@15,2000/FJSV,pgtb@1 1 fjgi
/pci@17,2000/FJSV,pgsb@1 2 fjgi
/pci@83,4000/pci@3/FJSV,p4ta@1 3 fjgi
/pci@83,4000/pci@3/FJSV,p4ta@1,1 4 fjgi
/pci@83,4000/pci@3/FJSV,p4ta@3 5 fjgi
/pci@83,4000/pci@3/FJSV,p4ta@3,1 6 fjgi
● The unit-address is the number to the right of FJSV,pwga@, FJSV,pgtb@, or FJSV,pgsb@.
The unit-addresses from the example are shown below.
PRIMEPOWER250/450
secondary LAN port
PW008GE5,
PW0G8GE2
PW008GE4,
PW0G8GE1
name fjgi fjgi fjgi
parent /pci@83,2000 /pci@15,2000 /pci@17,2000
unit-address 1 1 1
PW008QG1
name fjgi
parent /pci@83,2000/pci@3
unit-address
instance 3 is 1
instance 4 is 1,1
instance 5 is 3
instance 6 is 3,1
― The location of the fjgi.conf file depends on the model of the host system
as described below:
(1) PRIMEPOWER1 or PRIMEPOWER100
/platform/sun4u/kernel/drv/fjgi.conf
(2) PRIMEPOWER other than (1) or GP7000 family
/platform/sun4us/kernel/drv/fjgi.conf
(3) SPARC Enterprise T1000 or T2000
/platform/sun4v/kernel/drv/fjgi.conf
(4) SPARC Enterprise M4000,M5000,M8000 or M9000
/platform/SUNW,SPARC-Enterprise/kernel/drv/fjgi.conf
28