FUJITSU PRIMERGY TX150 S4 - Manual (Page 14)

System configurator and order-information guide
H PRIMERGY TX150 S4 Status 25.11.2005
continued
on previous
E. 2-Kanal Ultra 320 SCSI Controller für Disk Array
page
S26361-F3090-E256
2-channel RAID Controller U320
LSI
320-2x
256MB SDRAM ECC Cache
1x default with TBBU
plug: internal 2x HD68;
external: 2x VHDCI
without cable
64/133 PCI-X controller, 180mm
3.3V and 5V tolerant signaling
max. 1x per system
The fitting connection cables can be found in the configurator
of the external storage system and / or rack.
S26361-F2814-E6 Backup drive and HDD should run on separate channels.
68-Pin Kit for accessible drives
Cable with Terminator
To connect acc. drives to If internal HDD's are connected at the RAID controller
separate SCSI controller (not IME/ZCR), then for internal accessible drives
max. 1x per system the cable S26361-F2814-E6 must be ordered additionally!
I
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 14 of 18