FUJITSU PRIMERGY TX150 S4 - Manual (Page 10)

System configurator and order-information guide
D PRIMERGY TX150 S4 Status 25.11.2005
Section V Accessible drives
There are 3x 5.25" bays for accessible drives:
- 1x 5.25" bay is occupied by a DVD-/CD- respectively a CD-RW drive
- 2 x 5.25" bays remaining, can be occupied by 2x accessible drives
Setup TX150 S4 by ServerStart is supported with following configurations:
no DVD, no CD:
remote installation only ( PXE service & DHCP server required)
built in CD/DVD:
UNC Network share reachable or USB Floppy or MemoryBird connected
One of the following USB devices must be used for integrating the drivers during installation
process if no automized (e.g. Serverstart / Altiris / RIS / ADS / …) installation is done:
1) FDD USB (external): external USB FDD (USB cable included) S26391-F264-L226
2) USB Memorybird: Memorybird 256 MB S26391-F6046-L256
Memorybird 1GB S26391-F6046-L24
S26361-F2575-E1
Floppy disk drive 1"
Connector: 26pin
incl. description (Ger/US)
1" * 3.5", anthracite bezel
max. 1x per system
SNP:SY-F2234E1-A S26361-F3148-E1
DVD-ROM ATAPI DVD-RW 16x super multi drive
all formats, DUAL/DL, DVD-RAM
incl. description (Ger/US) only W2K, W3K and Linux
1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel
max. 2x per system max. 1x per system
S26361-F3157-E3
Tape drive LTO2HH Ultrium
200GB, 24MB/s, U160 SCSI
Connector: HD68
without cable
incl. description (Ger/US)
data and cleaning cartridge
1.6 * 5.25", anthracite bezel
max. 1x per system
S26361-F2849-E3
Tape drive VXA-2
80GB, 6MB/s, U2W SCSI
Connector: HD68
2x without cable
incl. description (Ger/US)
data and cleaning catridge
1.6 x 5.25", anthracite bezel
max. 2x per system
S26361-F2848-E3
Tape drive DDS Gen5
S26361-F2848-E31 (only for OBDR)
DDS-G5 for One buttom dis. recov.
36GB, 3MB/s, U2W SCSI
Connector: HD68
without cable
incl. description (Ger/US)
data and cleaning catridge
1.6 x 5.25", anthracite bezel
max. 2x per system
E
2x
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 10 of 18