FUJITSU PRIMERGY TX150 S4 - Manual (Page 11)

System configurator and order-information guide
E PRIMERGY TX150 S4 Status 25.11.2005
S26361-F2814-E6 Backup drive and hard disk should run on separate channels
68-Pin Kit for accessible drives
Cable with Terminator
To connect acc. drives to If internal HDD's are connected at the RAID controller
separate SCSI controller (not IME/ZCR), then for internal accessible drives
max. 1x per system the cable S26361-F2814-E6 must be ordered additionally!
Section VI Hard Disk Drives
S26361-F3121-E173 S26361-F3121-E114 S26361-F3121-E130
Hard disk 73GB in 1" carrier Hard disk 146GB in 1" carrier Hard disk 300GB in 1" carrier
10000rpm,<5,5ms, 8MB Cache 10000rpm,<5,5ms, 8MB Cache 10000rpm,<5,5ms, 8MB Cache
Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins)
hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray
occupies 1" bay occupies 1" bay occupies 1" bay
SCSI/RAID controller necessary SCSI/RAID controller necessary SCSI/RAID controller necessary
4x max. 4x per system max. 4x per system max. 4x per system
S26361-F3121-E573 S26361-F3121-E514
Hard disk 73GB in 1" carrier Hard disk 146GB in 1" carrier
15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache
Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins)
hot plug/hot replace tray hot plug/hot replace tray
occupies 1" bay occupies 1" bay
SCSI/ RAID controller necessary SCSI/ RAID controller necessary
max. 4x per system max. 4x per system
F
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 11 of 18