Fostex VM200 - Manual (Page 217)

MIDI In/Out Data Format
VM200 User’s Guide 217
3. FOSTEX EXCLUSIVE MESSAGE
Fostex Exclusive messages are received when [SYSTEM EX. Tx&Rx] is set to ON and the Rx
channel matches the channel of [Dev ID].
When the VM200 receives the System Exclusive message, the specified parameter will be
changed immediately.
When the VM200 receives the Parameter Request message, the corresponding parameter set-
ting will be transmitted immediately.
Fostex Exclusive messages are transmitted if the Tx channel matches the channel of [Dev ID]
and when you operate the key while [SYSTEM EX. Tx&Rx] is ON.
In response to the Parameter Request messages, VM200 transmits the parameter settings if
the Tx channel matches the channel of [Dev ID].
F0 51 Sub Id> F7
Command List
Setup Command
Channel/Buss Command
Command Request Status
Master Clock 18,10 28,10 38,10
Fs 18,11 28,11 38,11
Current Scene Name 18,20 28,20 38,20
Scene Recall 18,22
Scene Store 18,23
Rcl Safe – Fader 18,28,11 28,28,11 38,28,11
Rcl Safe – Pan 18,28,12 28,28,12 38,28,12
Rcl Safe – Routing 18,28,30,7f 28,28,30,7f 38,28,30,7f
Rcl Safe – Aux Send Level 18,28,41 28,28,41 38,28,41
Rcl Safe – Eff Send Level 18,28,49 28,28,49 38,28,49
Rcl Safe – Eq On 18,28,50,7f 28,28,50,7f 38,28,50,7f
Rcl Safe – Eq 18,28,5f 28,28,5f 38,28,5f
Eq Enable Ch 18,30 28,30 38,30
Add Aux Mode 18,31 28,31 38,31
Mon Sel 18,40 28,40 38,40
Solo Mode 18,42 28,42 38,42
Solo Key Mode 18,43 28,43 38,43
Motor OnOff 18,50 28,50 38,50
Power On Recall 18,51 28,51 38,51
Cascade 18,52 28,52 38,52
Memory Backup 18,60
Smoothing 18,32f7 28,32,17 38,32f7
Command Request Status
ST Buss – Ch On 19,01,10 29,01,10 39,01,10
ST Buss – Master Fader 19,01,11 29,01,11 39,01,11
ST Buss – Solo 19,01,19 29,01,19 39,01,19
REC Buss – Master Level 19,02,11 29,02,11 39,02,11
REC Buss – Solo 19,02,19 29,02,19 39,02,19
AUX Buss – Ch On 19,05 10 29,05 10 39,05 10
AUX Buss – Master Fader 19,05 11 29,05 11 39,05 11
AUX Buss – Solo 19,05 19 29,05 19 39,05 19