Fostex VM200 User Manual
Page 150
Scene Memory
150
VM200 UserÕs Guide
Preset Scene Memory
The VM200 includes three preset scenes: P0, P1, and P2.
These presets were designed as scenes you can quickly recall for
three common purposes:
❑
Init Mix: For initial mixing
❑
Recording: For a typical recording situation
❑
Mix Down: For mixing down
You can recall a preset scene, edit its parameters, and store it again
under a new name. However, you cannot overwrite the pre-pro-
grammed settings of a preset scene.
These preset programs are all quite similar; they differ only in the fol-
lowing settings and usage:
#
Name
EQ
Enable
ADD.
AUX
Routing
Usage
P0
Init_Mix
1–8
ON
1–20:ST Buss
Normal mixing application, such as
PA, live, etc.
P1
Recording
1–8
OFF
1–8:Rec Buss
9–20:ST Buss
Overdubbing or bounce recording via
Rec Buss.
P2
Mix_Down
9–16
ON
1–20:ST Buss
ADAT mixdown