FUJITSU M3097DE - Manual (Page 41)

4-2
Document Quality
This section describes document types and weights available for the scanner, and precautions.
Document type
The recommended paper type for document is as follows:
• Woodfree paper
• Plain paper (for example, the paper specified for XEROX 4024)
When using all other type paper, check that it is successfully fed by ADF before performing a reading
operation.
Paper weight
The paper weight is as follows :
• 52 to 104 g/m
2 (3.9 to 27.8 lb)
Precautions
The following documents may be hard to read by ADF. Preliminary document feed test may be necessary
to avoid the unexpected errors. If the document slips in ADF (JAM error) or double feed occurs frequently,
read them by flatbed.
• Paper with clips or staple
• Paper with wet ink
• Paper of which thickness is not constantly equal. (like envelope)
• Paper with large rumples or curl. (See NOTE on the next page.)
• Paper with folds or tears
• Tracing paper
• Coating paper
• Carbon paper
• Paper smaller than 148 mm x 105 mm size, or larger than A3 or Double Letter
• Other than paper ; clothes, metal foil, or OHP film
• Photographic paper
• Paper with notches on its side
• Other than rectangle paper
• Paper that is very thin