Setup mode, Simplex reading mode, Smoothing – FUJITSU M3097DE User Manual
Page 65: Temporary error, Terminator, Time-out limit
GL-6
SETUP mode
In this mode, users can view or set a variety of function in Off-line.
Simplex reading mode
Only the front side of the document is read in this mode. Place the documents face-up at the center of
the hopper table.
Smoothing
Smoothing eliminates jaggies from slanted lines and curves. Irregular convexities are deleted and
irregular concavities filled in. This is useful in OCR applications, for example.
Temporary Error
An error that is recoverable by operator.
Terminator
Devices with SCSI interface are daisy-chained. A resistor that includes terminal circuits needs to be
placed at both ends of a cable when devices are daisy-chained.
Time-out limit
This is the time which the scanner waits for next document insertion after the last document feeding. The
scanner returns Paper Empty when no document is set after time-out limit.