FUJITSU M3097DE - Manual (Page 18)

1-6
Button / LED Function
Name of the button Function
and LED
Button Next LCD displays the next screen.
Previous LCD displays the Previous screen.
←
Moves the cursor to the left
→
Moves the cursor to the right
Exit • When “CHECK” LED lights, pressing this button releases error status (turn
off “CHECK” and returns to “Scanner Readry” screen).
• When you are setting on the operator panel, pressing this button returns to
“Scanner Ready” screen immediately.
ENTER The parameter selected by cursor becomes effective.
(START) When Manual start mode is set or “READ” lamp lights, this button is effective
and starts the reading.
(STOP) This button is effective during reading operation and stops the reading.
LED Indicates that the scanner is ON.
READ Indicates that the scanner is reading or ready to read.
CHECK • If it lights, it means that some alarm occurred. Pressing “Exit” button turns
off “CHECK” lamp.
• If it blinks at one second cycle, it means that jam or double feed is
detected. Removing the jammed paper turns off “CHECK” lamp. At double
feed, pressing “Exit” button turns off “CHECK” lamp.
• If it blinks at four seconds cycle, it means that ADF cleaning is necessary.