FUJITSU M3097DE - Manual (Page 53)

6-4
Setting IPC pre-set mode
When you set the using of IPC-2 pre-set mode, you must set as follows:
1 Press or and let the
scanner display Screen 42.
2 At Screen 42, press or to select
the document number and press to
activate the IPC pre-setting. Then the
scanner displays Screen 42-1. Go to
procedure 3. If you want to disable the
IPC pre-setting, select “No” then press
. Finally press to return to
“Scanner Ready” screen.
3 At Screen 42-1, select “Yes” to activate
the IPC pre-setting or select “No” to
disable the IPC pre-setting. Note that
when you activate the IPC pre-setting,
the IPC setting by Host computer is
ignored. Finally press
, then the
scanner displays next item, Screen 43.
Document number are classified in line-art scanning as follows:
The horizontal axis shows the background density/color of paper.
The vertical axis shows the density of charcter/ line.
Background density
Normal
← →
Dark
Normal
↑
↓
Light
q : Normal background
and character.
w : Normal background
and light character.
Background color
Red Green Blue
r : Light character
on red paper.
e : Dark background
and normal-density
character.
t : Light character
on green paper.
Character
density
q - t are the document number set in setup mode.