1 resources used by monitor program, Resources used by monitor program – FUJITSU CM71-00329-7E User Manual
Page 219
209
CHAPTER2 Dependence Functions
2.5.1
Resources Used by Monitor Program
The monitor program of the monitor debugger uses the I/O resources listed below. The
target hardware must have these resources available for the monitor program.
■ Required Resources
The following resources are required to build the monitor program into the target hardware.
Table 2.5-1 Resources Used by Monitor Debugger
1
UART
Required
For communication with host computer
4800/9600/19200/38400 bps
2
Monitor ROM
Required
About 6 KB required (For further details, refer to Link
Map.)
3
Work RAM
Required
About 2 KB required (For further details, refer to Link
Map.)
4
NMI Switch
Optional
Used for suspending program forcibly. If there is no
built-in NMI switch, only the breakpoint can be
stopped.
5
Timer
Optional
Used by SET TIMER/SHOW TIMER. Requires 32-bit
timer in 1
s