FUJITSU CM71-00329-7E User Manual

Page 125

Text mode
Original mode

115

CHAPTER2 Dependence Functions

Notes:

•

In the DSU3 chip, the code event can be used as a break factor and a trace measurement start
factor. This mode is called a trace sampling mode. There are two trace sampling modes.

- Full mode: The code event is used as a break factor.

- Trigger mode: The code event is used as a trace measurement start factor.

To use the code event as a break factor, set the full mode.

Set as follows:

Command

- SET TRACE/FULL

For details, refer to "4.12 SET TRACE (type 2)" in "SOFTUNE Workbench Command
Reference Manual".

Dialog

- Trace setting dialog

For details, refer to "4.4.8 Trace” in "SOFTUNE Workbench Operation Manual".

•

This function cannot be used when the FR60Lite is used. For details, refer to "2.3.4 Break".