FUJITSU CM71-00329-7E - Manual (Page 108)

98
CHAPTER2 Dependence Functions
2.3 Emulator Debugger (MB2198)
This section describes the emulator debugger functions that are available when the
emulator debugger (MB2198) is specified.
■ Emulator Debugger
When choosing the emulator debugger from the setup wizard, select one of the following emulators.
• MB2197
• MB2198
The following description explains the case when MB2198 has been selected. The emulator debugger
(MB2198) is software that controls an emulator from a host computer via a communications line (RS-232C
or LAN or USB) to evaluate programs.
Products targeted for debugging must have the following DSUs (debug support units):
• DSU3
• DSU4
Before using the emulator debugger, initialize the emulator. For details, refer to "Appendix B Monitoring
Program Download", and "Appendix C LAN Interface Setup", in "SOFTUNE Workbench Operation
Manual".
■ Debug Functions with FR80S
When FR80S is used in an environment with the external trace function, the following debug functions
which are equal to those of FR60Lite are available. For details of each function, refer to its descriptions in
this manual.
* Includes the following three types:
• Hardware
• Hardware / Count
• Software
Table 2.3-1 Debug Functions of FR80S
FR80S (external trace function available) FR60Lite
Code break *
❍ ❍
Data break
❍ ❍
Datawatch break
✕ ❍
Sequencer
❍ (write access only) ❍
Trace trigger
❍ (write access only) ❍
Performance ❍ (write access only) ❍
Real-time memory
❍ ❍
Power-on Debugging
✕ ❍
RAM checker
❍(write access only) ❍