Furuno FCV-1100L - Manual (Page 55)

3. SYSTEM MENU
3-7
3.5 TEMP SETTING Menu
The TEMP SETTING menu sets up the water temperature sensor (FURUNO-
supplied sensor only).
DISP ALM TX/RX E/S SYSTEM
Select temperature unit.
[-/+]: Change set, [EXIT]: Exit
TEMP SETTING
TEMP UNIT :
°
F
TEMP INPUT : SENSOR
TEMP ADJUST : +0.00
°
F (-20 +20)
TEMP OUTPUT : ON
TEMP READOUT: ON
TEMP GRAPH : OFF
TEMP COLOR : STD
TEMP SETTING menu
TEMP UNIT
Chooses unit of temperature measure, Celsius or Fahrenheit.
TEMP INPUT
Chooses source of water temperature data; sensor (FURUNO), or NMEA.
TEMP ADJUST
Offsets water temperature indication to improve accuracy. Effective only for
FURUNO-supplied water temperature sensor.
TEMP OUTPUT
Turn on/off water temperature data output.
TEMP READOUT
Turns on/off water temperature indication.
TEMP GRAPH
Turns on/off water temperature graph and chooses graph scale.
OFF: No water temperature graph