E-35, Setting the input terminals, English – FUJITSU P42VHA20W User Manual

Page 35

English

E-35

* On-screen information disappears if you do not take any action for about 60 seconds.

SETTING THE INPUT TERMINALS

• Selecting Video Mode (Video Input)

You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto1:

Automatically selects NTSC, PAL and SECAM.

Auto2:

Automatically selects NTSC and M-PAL.

Other than Auto: You need to select a system appropriate to the input signal.

Press

to store.

• Selecting S-video Mode (S-video Input)

You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto1:

Automatically selects NTSC, PAL and SECAM.

Auto2:

Automatically selects NTSC and M-PAL.

Other than Auto: You need to select a system appropriate to the input signal.

Press

to store.

• Selecting D-SUB Input (D-SUB Input)

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1) Select D-SUB Input and press

D-SUB Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC

Decoder

RGB-PC: For using RGB for PC

Decoder: For using digital broadcast tuner

(3) Press

to select Mask.

(4) Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off:

Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels

specified.

(5) Press

to store.

• DVI Input

You can select the signal method input to the DVI input terminal.

Each time or is pressed, the setting is changed.

DVI1

DVI2

DVI1:

Used when connecting to a PC.

DVI2:

Used when connecting to a DVD player or digital tuner.

Press

to store.

* Set according to the signal method before connecting peripheral device.

“D-SUB Input” selection screen

1234567890123456789012345678901

This fringe part is masked.

This manual is related to the following products:

P50XHA10A P50XHA10U P42VHA10A P42VHA10W P42VHA20A P42HHA10W P50XHA10W P42VHA20U P42HHA10A