Furuno DS-80 - Manual (Page 20)

12
2 OPERATION OF OPTIONAL
EQUIPMENT
The Digital Indicator DS-830 and Distance
Indicator DS-840 have the same controls as
the display unit. This chapter explains the
features which are not shared with the
display unit.
2.1 Digital Indicator DS-830,
Distance Indicator DS-840
2.1.1 Selecting a display
Press the [DISP] key to select the display
mode. Each time the key is pressed the
display shows speed plus distance run or
speed alone as below.
[DISP] key
to switch
SPEED STW
DISTANCE
nm
10.0
12.50
SPEED STW
1 0 . 0
kt
Speed
Distance
Run
SPEED INDICATOR
SPEED INDICATOR
kt
Digital Indicator DS-830
SPEED STW
DISTANCE
DISTANCE INDICATOR nm
10.0
12.50
DISTANCE
DISTANCE INDICATOR
1 2 . 5 0
nm
[DISP] key
to switch
Speed
Distance
Run
kt
Distance Indicator DS-840
2.1.2 Menu operation
1. Press the [MENU] key to show the
display below.
MENU
DISTANCE RUN DISPLAY
SYSTEM MENU2
2. For details refer to the following:
DISTANCE RUN DISPLAY: See paragraph
1.6.
SYSTEM MENU 2: See 1.7.7 System Menu
2.
2.1.3 Adjusting dimmer and
contrast
See paragraph 1.3.