Furuno DS-80 - Manual (Page 19)

11
1.7.7 System menu 2
The System Menu 2 contains the diagnostic
test and selection of dimmer control and
display language.
1. Press the [MENU] key to open the
menu.
2. Select SYSTEM MENU 2 and press the
[ENT] key.
SYSTEM MENU2
TEST
DIMMER INTERNAL
/LANG. ENGLISH
ENT: SET
TEST: Checks the equipment for proper
operation. For further details see Chapter 3.
DIMMER: See paragraph 1.3.2.
LANG.: Selects the language to use in
menus, English or Japanese.
1.8 Demonstration Mode
The demonstration mode outputs the
Doppler speed signal to external equipment.
This checks if the signal is being correctly
output. )
1. Press the [MENU] key to open the
menu.
2. Select DEMO and press the [ENT] key.
DEMO
SPEED
+ 1 0 . 0 k t
DATA DISPLAY OFF
ENT: SET
3. Select SPEED and press the [ENT] key.
4. Select the digit to change with or .
5. Use or to set. (The setting range
is
-10.0 to +40.0 kt, and the default setting
is +10.0 kt.)
6. Press the [ENT] key.
7. Press the [ENT] key to open the DATA
DISPLAY menu.
DEMO
SPEED
+ 1 0 . 0 k t
DATA DISPLAY
OFF
ENT: SET
ON
OFF
8. Press to select ON and press the
[ENT] key.
9. Press the [MENU] key twice to close the
menu.
The indication “DEMO” appears at the top
right-hand corner when the demo mode is
on. To turn off the demonstration display,
show the DEMO menu and set SPD to OFF.
SPEED DEMO
DISTANCE
10.0
Demonstration
mode "ON"
kt