FUJITSU MAG3091FC - Manual (Page 92)

C141-E078-02EN D - 3
Table D.1 Fibre channel interface function specifications (2 of 8)
{: Provided ×
: Not provided
Item Specification
INQUIRY (12)
Ο
EVPD (Enable Vital Product Data)
Ο
Typical INQUIRY data
Ο
(64 byte long)
VPD Page 0: VPD page code listing
Ο
VPD Page 80: Device serial number
Ο
VPD Page C0: Operation mode
Ο
READ DEVICE CHARACTERISTICS [VU] *(13)
×
PRIORITY RESERVE [VU] *(14)
×
MODE SELECT (15)
Ο
PF=(page format)
Ο
(Specified value
ignored)
Page 1: Read/write error recovery
Ο
(12 B: Savable)
AWRE (Automatic Write Reallocation Enabled)
×
(Specified value
ignored)
ARRE (Automatic Read Reallocation Enabled)
Ο
(Changeable)
TB (Transfer Block)
Ο
(Changeable)
RC (Read Continuous)
×
EER (Enable Early Recovery)
×
PER (Post Error)
Ο
(Changeable)
DTE (Disable Transfer on Error)
×
(Specified value
ignored)
DCR (Disable Correction)
×
Retry count at read
Ο
(Changeable)
Correctable bit length
Ο
(Not changeable)
Head offset count
×
Data strobe offset count
×
Retry count at write
Ο
(Changeable)
Recovery processing time restriction
×
Page 2: Disconnection/reconnection
Ο
(16 B: Savable)
Buffer-full ratio
Ο
(Changeable)
Buffer-empty ratio
Ο
(Changeable)
Bus inactivity restriction
×
Disconnection time restriction
×
Connection time restriction
×
Maximum burst length
Ο
DTDC (data transfer disconnect control)
×
EMDP (Enable Modify Data Pointer)
×
FARd, FAWrt, FAStat (Tair Arbitoration
READ/Write/Status)
Ο
(Not changeable)
DImm (Disconnect Immediate)
×
*1 Fujitsu-specific function
Command
(Group 0)