HP Photosmart 140 series - Manual (Page 23)

basics guide
print from a memory card
19
To insert a memory card:
1 Remove any memory cards that are already inserted into any of the
memory card slots.
Caution! Do not pull out a memory card while the memory card light is
blinking. For more information, see remove a memory card on page 22.
2 Hold the memory card so the correct side faces up. To determine the
correct orientation for your memory card, see the table after these steps.
If you are using a Sony Memory Stick Duo
™ memory card, attach the
adapter that came with the memory card before you insert it into the
printer’s memory card slot.
3 Insert the memory card into the appropriate memory card slot. The end
with the metal contacts or pinholes must go into the printer first.
Caution! The memory card may not insert all the way into the printer.
Inserting the memory card any other way or forcing the memory card into
the printer too far may damage the memory card or the printer.
4 Gently push the memory card into the printer until it stops. The message
R
EADING CARD
appears on the printer’s LCD screen.
Note: If you insert a SmartMedia memory card upside down, the red On/
Attention light blinks, and the messages C
ARD INSERTED INCORRECTLY
and
G
OLD LABEL SHOULD FACE DOWN
flash alternately on the printer’s LCD screen.
Remove the memory card and reinsert it properly.