Hoover S1211 - Manual (Page 8)

The dust cup assembly is con-
nected at the rear of the cleaner.
Lower handle to operating
position by depressing handle re-
lease lever.
2. There are two projections on
the metal connector at the bot-
tom of the dust cup assembly.
These should be placed firmly in-
side the grooved plate at the rear
of the cleaner.
3. Slide lock lever to the left and
pivot metal connector fully for-
ward.
4. Slide lever to the right to fit
completely over the lock.
5. Attach the spring on the top of
the dust cup assembly to the
spring hook located on the back
of the handle.
6. Wrap cord around cord storage
hooks.