Hoover S1211 - Manual (Page 12)

By using this converter attach-
ment, suction is channeled from
the cleaner to the hose and clean-
ing tools.
The converter must first be as-
sembled to the hose by inserting
the converter into the hose con-
nector.
HOSE
I
CONNECTOR CONVERTER I
Push connector and converter to-
gether and twist until the projec-
tions on the converter fit into the
holes on the hose connector. This
unit should remain assembled for
all future tool use.
A. Attach converter
Disconnect cleaner from electri-
cal outlet. Cleaner must not be
plugged in when positioning or
removing converter.
With cleaner in upright position,
grasp handle and lean cleaner
backwards until dust cup is flat
on the floor and the underside is
visible.
11