Hoover S1211 - Manual (Page 6)

How to assemble
Remove cardboard from end of
handle sections.
Remove nut with plastic shield
from top handle section.
With cord storage hooks on same
side, slide the two handle sec-
tions together.
Insert bolt through square hole
on front of handle and secure
with nut through plastic shield.
Tighten with screwdriver.
Unscrew nut and remove bolt
from handle bail.
Slide lower handle through chan-
nel of dust cup assembly, with
dust cup and bag on back side of
handle (side on which ON-OFF
switch is located).
D U S T
CUP
CHANNEL
5