Hoover S1211 - Manual (Page 18)

The belt
The belt of your HOOVER cleaner causes the agitator to rotate and is im-
portant for the effective operation of the cleaner. The belt is located
under the bottom plate of the cleaner and should be checked from time
to time to be sure it is in good condition.
When to replace the belt
To check the belt, remove the bottom plate (see following section). If the
belt is stretched, cut, or broken, replace the belt.
What belt to buy
To assure effective operation, use only genuine HOOVER belts with your
cleaner. When purchasing a new belt ask for HOOVER part No. 49259.
How to replace the belt
Disconnect cleaner from elec-
trical outlet.
1. Turn cleaner over. Remove
bottom plate by releasing
latches.
2. Release worn belt from pulley.
3. Lift out agitator, remove old
belt and place new belt in groove
of agitator.
17