LEICA 10x42 Geovid R Binocular/Rangefinder (Yards) - Manual (Page 44)

42
4. Repeatedly press the main / release button to
select the relevant ballistics curve, i.e.
–
US1
to
US12
or
– EU1 to EU12 , or
if you want the range to be displayed with no
point of impact correction (
AbC
)
– OFF .
5. Save your setting by pressing the secondary /
menu button.
• The saved setting appears continuously for 4s as
confirmation and the display then changes to SId
and goes out if no more actions are performed.
If a ballistics curve is set, after each range
measurement the range is displayed for 2s and then
the calculated correction value for 6s.
SETTING THE ZEROING DISTANCE
Start with step 1 if you have not yet opened the menu
system and with step 3 if you have already set the
ballistics curve and Sld is still flashing in the display.
1. Press and hold (≥3s) the secondary / menu button
(8).
•
US.EU
appears.
2. Briefly (<2s) press the secondary / menu button
twice.
• The display changes to
bALL
and then to
SId
.
3. Select the relevant zeroing distance by repeatedly
pressing the main / release button (7).
–
100
[m],
– 200 [m], or
– GEE [m], or
–
100
[y], or
–
200
[y], or
– 300 [y].
4. Save your setting by pressing the secondary /
menu button.
• The saved setting appears continuously for 4s as
confirmation and the display then changes to AbC
and goes out.