Arturia BeatStep Pro MIDI/Analog Controller and Sequencer Kit with CV/Gate Cables (Black) - Manual (Page 75)

6.1.6. Editing all steps in a pattern at once
It is possible to edit certain parameters for all of the active steps in a pattern simultaneously.
This is done using the SHIFT button and one of the first two encoders.
6.1.6.1. SEQ1/SEQ2
You can set the Velocity or the Gate length of all active steps in a pattern at the same time
by holding [SHIFT] and turning Knob 1 or Knob 2.
• SHIFT+ Knob 1 will apply an offset to the values contained in the pattern. This
offset will be shown in the display with a range between -99 and +99. See
example 1 [p.71] below.
• SHIFT+ Knob 2 will force all active steps to the same value as soon as you turn
the knob. The new value will be shown in the display. See example 2 [p.71] below.
These edits will affect only those events located between step 1 and the last step of the
pattern (i.e., the active steps). Any steps outside of that range will not be affected.

♪ : The Pitch of all steps in SEQ1 or SEQ2 cannot be edited using these methods. To accomplish this,
use the Transposition features [p.34] as described in the Step Sequencers [p.24] chapter.
6.1.6.2. DRUM
You can set the Velocity, the Gate length, or the Shift of all active steps in a Drum pattern at
the same time by holding [SHIFT] and turning Knob 1 or Knob 2.
• SHIFT+ Knob 1 will apply an offset to the values contained in the pattern. This
offset will be shown in the display with a range between -99 and +99. See
example 1 [p.71] below.
• SHIFT+ Knob 2 will force all active steps to the same value as soon as you turn
the knob. The new value will be shown in the display. See example 2 [p.71] below.
These edits will affect only those events located between step 1 and the last step of the
pattern (i.e., the active steps). Any steps outside of that range will not be affected.
Note that the time shift will be applied after the SHIFT button is released.

♪ : For the DRUM sequencer the changes will be applied to the currently selected drum track only, not
the entire drum pattern.
Arturia - User Manual BeatStep Pro - Advanced Features 70