Touch strip, Midi send/receive, Midi cc – Arturia BeatStep Pro MIDI/Analog Controller and Sequencer Kit with CV/Gate Cables (Black) User Manual
Page 122: Using the touch strip with a daw, Using the touch strip with a daw [p.117, Using the, Touch strip with a daw [p.117
10.9.2. Touch Strip
10.9.2.1. MIDI Send/Receive
Use the pull-down menu to specify whether the BeatStep Pro will send and reeceive MIDI
controller data. The range of transmitted and recognized values is detailed in
Touch Strip with a DAW [p.117]
.
10.9.2.2. MIDI CC
Use the virtual knob or the value field to select the MIDI CC number the Touch Strip will
transmit and receive.
10.9.2.3. Using the Touch Strip with a DAW
The activity on the touch strip can be recorded into a DAW when the MIDI Send/Receive
parameter is enabled. It will send values for MIDI CC #9 by default, but you can select a
different MIDI CC# as described above.
The touch strip will send only the following values:
Touch strip region
MIDI CC value
1/4
25
1/8
50
1/16
75
1/32
100
release value
0
However, if you draw a controller curve for the touch strip in your DAW the BeatStep Pro will
respond to the values in the following way:
MIDI CC value received
Touch strip region selected
1-25
1/4
26-50
1/8
51-75
1/16
76-100
1/32
117
Arturia - User Manual BeatStep Pro - MIDI Control Center