Arturia BeatStep Pro MIDI/Analog Controller and Sequencer Kit with CV/Gate Cables (Black) - Manual (Page 126)

10.9.7. Sync
These allow you to specify the response to various synchronization and tempo options.
10.9.7.1. Clock In/Out Settings
This is where you determine which clocking signal will be transmitted and recognized by
the Clock input and output connectors. Settings: 1step, 24 ppq (pulses per quarter note), 48
ppq, and 2 ppq (Korg).
10.9.7.2. Tap Tempo
Choose whether it will take 2, 3, or 4 taps to set the Tempo.
10.9.7.3. Tempo
This parameter allows you to override the independent Tempo settings of each Project.
When set to Global each Project will play at the current Tempo value on the front panel.
There also is a front-panel shortcut that will toggle between Global tempo and per-Project
tempo. From Control Mode, hold SHIFT and press Step button 15. When the Step button is lit,
Global tempo is selected. When it is not lit, Project tempo is selected.
10.9.7.4. Wait to Load Project
With this parameter you can specify whether a new Project will be loaded as soon as
you select it or not. This is useful in live performance settings where you may not want to
interrupt the flow of the music between Projects.
If SEQ1, SEQ2 and the Drum pattern are different lengths and this preference set to On, the
BeatStep Pro will wait until the end of the Drum pattern before loading the next Project.
121 Arturia - User Manual BeatStep Pro - MIDI Control Center