Arturia BeatStep Pro MIDI/Analog Controller and Sequencer Kit with CV/Gate Cables (Black) - Manual (Page 53)

4.3. Saving a Drum pattern
It’s important to know that if you switch to another pattern, you will lose any edits you
have made to the first pattern unless you save it first. You will know that a pattern has been
modified if a dot is visible next to the pattern number in the display.
You can save individual patterns from within DRUM mode without having to save the whole
Project. Here’s how:
• Start in DRUM mode.
• Hold the SAVE button. The Step button corresponding to the number of the current
pattern will light up with the DRUM mode color (purple). If you have saved other
patterns their corresponding Step buttons will light up in white to show you that
they are not empty.
• Select the Step button that corresponds to the location where you want your new
pattern to be saved.
• Release the buttons. Your pattern has been saved to the location you selected.
4.4. Copying a Drum pattern
You can also copy a pattern from one location within the Drum sequencer to another, even
if no edits have been made. To do this, simply follow the steps described above in Saving a
Drum pattern [p.48] and select a new location number instead of the original number.
4.5. Clearing a Drum pattern
The process of clearing a pattern [p.20] is described in the Basics chapter.
Arturia - User Manual BeatStep Pro - The Drum Sequencer 48