Arturia BeatStep Pro MIDI/Analog Controller and Sequencer Kit with CV/Gate Cables (Black) - Manual (Page 63)

5.9.2. Input Channels
Each sequencer (SEQ1, SEQ2 and DRUM) can receive MIDI on its own channel by following
these steps:
• Select the sequencer you want to change by pressing the [SEQUENCER X] or
[DRUM] button
• Press and hold the SHIFT button
• Press and hold the CHAN button
• Press one of the Step buttons.
Note that when the SHIFT + CHAN buttons are pressed the Step buttons show three different
colors, not four. This is because Control Mode does not have an input channel.
The color scheme follows the front panel design:
Input channel color
Sequencer 1 Green
Sequencer 2 Yellow
Drum Purple
Arturia - User Manual BeatStep Pro - Projects 58