Pelco IME3ICM-E In-Ceiling Mount for Sarix Enhanced 3 Series Cameras - Manual (Page 21)

C6644M (2/20) 21
Completing the Camera Installation
1. If previously removed, reattach the safety lanyard to the backbox.
2. Reattach the lower dome to the backbox by fastening the three screws. Refer to the following figures for the appropriate method to
reattach the lower dome.
Figure 13. Incorrect Dome Cover Attachment Method
Figure 14. Correct Dome Cover Attachment Method
Figure 15. Align Small Hole for Microphone
3. Put on the trim ring and rotate it clockwise to secure the trim ring on the bracket.