Dome camera models, Supplied parts list, User-supplied parts list – Pelco IME3ICM-E In-Ceiling Mount for Sarix Enhanced 3 Series Cameras User Manual
Page 10: Product label, Supplied parts list user-supplied parts list

C6644M (2/20)
10
Dome Camera Models
SUPPLIED PARTS LIST
USER-SUPPLIED PARTS LIST
In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:
PRODUCT LABEL
The product label lists the model number, serial number, and Media Access Control (MAC) address. This information might be required for setup. A product
label is located on the bottom of the camera and on the side of the product box.
Qty Description
1
Camera
1
Surface mounting template
1
Installation manual
1
China RoHS document
1
Power terminal block
2
Plastic expansion anchors
2
M4 x 35 mm self-tapping Phillips screws
1
Torx T20 security L-key
1
Grommet
1
Important Safety Instructions document
Qty Description
1
Conduit (if applicable)
1
Conduit adapters (if applicable)
1
RJ-45 connector to terminate cables
1
Cat5e (or higher) cable
1
#2 Phillips screwdrivers
1
Tool for drilling
1
24-28 AWG 4, 8 or 10 multi conductor cable for alarms and/or audio (optional) and/or power
1
16-20 AWG 2 conductor cable for power (optional)
1
Up to a 256 GB Micro SDHC or SDXC card capable of a minimum write speed of 10 MB/sec is recommended for recording HD video
(optional)