Pelco IME3ICM-E In-Ceiling Mount for Sarix Enhanced 3 Series Cameras - Manual (Page 12)

C6644M (2/20) 12
Conduit Plug Options
It is recommended to use conduit when possible for cable entry into the housing. The Sarix IME Series camera comes with two conduit openings
(side and top entry). Only one entry is intended to be used. the other entry must be blocked with the conduit plug (supplied). Alternatively, a
grommet is supplied for cable entry through the top conduit opening when it is not possible to use the conduit. If using the supplied grommet,
puncture a round hole(s) as needed in the grommet that is smaller than the diameter of the cable that will be passed through the grommet.
The grommet can be installed in the following way:
1. Remove the lower dome, if necessary, and press the grommet into the top conduit entry hole.
Figure 2. Press in Grommet
2. Feed an unterminated cable through the hole in the grommet.
3. Terminate the cable with the appropriate connector.
Figure 3. New Grommet