Profoto B10X OCF Flash Duo Kit - Manual (Page 29)

B10
X,
B10
X Plus
29
www.profoto.com
Connectivity
B10X/B10X Plus comes with built-in Profoto AirX connectivity. AirX is
the 3rd generation of wireless Profoto connectivity, after Air and AirTTL.
AirX supports:
• Wireless Air and AirTTL functionality in Profoto Air and AirTTL
enabled remotes.
• Dedicated AirX functionality in AirX enabled Profoto remotes and
apps.
Set up connectivity with Profoto remotes
These instructions only cover the basic setup on B10X/B10X Plus. For
detailed operating instructions, refer to the user guide for your Profoto
remote.
1. On the B10X/B10X Plus settings menu, set Air to ON.
2. On the B10X/B10X Plus main menu, select the same channel that
is set on your Profoto remote.
3. On the B10X/B10X Plus main menu, assign a group (A-F).
Auto (TTL) with Profoto remotes
Auto (TTL) requires no additional setup on the B10X/B10X Plus, once
the Air channel and group setup is done. Just switch between Auto
(TTL) and Manual (MAN) on your Profoto remote to select if you want
the remote to adjust the flash automatically or if you want to control it
manually.
B10X/B10X Plus will keep the flash power set by Auto (TTL) when you
switch the remote to Manual (MAN). This makes it easy to use Auto
(TTL) as your “light meter” to get a good starting point for manual
adjustments.
When Auto (TTL) is activated by the remote, the AUTO indicator
temporarily appears on the energy display [9] or [10].
When an Auto (TTL) group adjustment is made on the remote, the
AUTO indicator, including the offset, temporarily appears on the
energy display [9] or [10].