Profoto B10X OCF Flash Duo Kit - Manual (Page 27)

B10
X,
B10
X Plus
27
www.profoto.com
Control sounds
The CONTROL SOUNDS setting can be set to ON or OFF to enable/
disable tactile sounds for control knobs and buttons. Factory default
setting is ON.
Warning sounds
The warning sounds setting is used to enable/disable the sound for the
wrong exposure alarm.
NOTE
The EXP indicator will always appear temporarily on the menu display [8] in case of a
wrong exposure alarm, regardless of the warning sound setting.
Display brightness
The DISPLAY BRIGHTNESS setting is used to set display brightness.
There are four selectable settings:
• AUTO: The display brightness is automatically adjusted based on
the ambient lighting. This is the factory default setting.
• MAX
• MEDIUM
• LOW
Standby
The STANDBY setting sets a timer for a period of inactivity until the
B10X/B10X Plus goes into standby mode to save battery. There are
four selectable settings:
• 5 MIN: The B10X/B10X Plus goes into standby mode after 5
minutes of inactivity.
• 30 MIN: The B10X/B10X Plus goes into standby mode after 30
minutes of inactivity. This is the factory default setting.
• 1 HOUR: The B10X/B10X Plus goes into standby mode after 1
hour of inactivity.
• NEVER: The B10X/B10X Plus never goes into standby mode.