Profoto B10X OCF Flash Duo Kit - Manual (Page 22)

B10
X,
B10
X Plus
22
www.profoto.com
Adjust the continuous light
The continuous light can be set to FREE (factory setting) or
PROPORTIONAL in the settings menu.
1. When set to FREE the continuous light brightness can be
adjusted separately from the flash power.
2. When set to PROPORTIONAL the continuous light brightness is
always proportional to the flash power.
Adjusting continuous light when it is set to FREE
1. Press the Continuous light dial [10] to turn the continuous light
on or off.
2. When the continuous light is on, the brightness and color
temperature is indicated in the display [9] by two separate bars as
shown below.
3. Turn the Continuous light dial [10] to change the brightness.
4. Press and turn the Continuous light dial [10] to change the color
temperature.
Adjusting continuous light when it is set to PROPORTIONAL
1. Press the Continuous light dial [10] to turn the continuous light
on or off.