Profoto B10X OCF Flash Duo Kit - Manual (Page 28)

B10
X,
B10
X Plus
28
www.profoto.com
Auto off
The AUTO OFF setting sets a timer for a period of inactivity until the
B10X/B10X Plus turns off to save battery.
There are three selectable settings:
• 15 MIN: The B10X/B10X Plus turns off after 15 minutes of
inactivity.
• 1 HOUR: The B10X/B10X Plus turns off after 1 hour of inactivity.
This is the factory default setting.
• NEVER: The B10X/B10X Plus never turns off automatically.
NOTE
If both the STANDBY and AUTO OFF functions are deactivated, the battery will drain in
approx. 8 hours of inactive use.
About
The ABOUT section displays unit specific information about the serial
number, hardware, and installed firmware.
Regulatory info
The regulatory info section displays regulatory information.
Factory reset
FACTORY RESET will reset all settings to factory default settings.