Change front glass, flash tube and led – Profoto B10X OCF Flash Duo Kit User Manual
Page 20
B10
X,
B10
X Plus
20
www.profoto.com
Mount umbrellas
The umbrella holder is integrated into the stand adapter. Umbrellas are
easily mounted by sliding the umbrella shaft into the umbrella holder
[15]. The umbrella shaft diameter must be between 7 mm and 8 mm to
fit into the umbrella holder.
1. Mount the stand adapter on the B10X/B10X Plus.
2. Slide the umbrella shaft into the umbrella holder [15] passing the
point where you feel some friction.
3. Continue to slide the umbrella shaft into the umbrella holder [15]
until the umbrella is positioned where you want it.
Change front glass, flash tube and LED
Replacement of the front glass, flash tube, or continuous light LED
can only be performed by a service technician. Contact your nearest
Profoto dealer or distributor for professional service.