Attach the stand adapter – Profoto B10X OCF Flash Duo Kit User Manual
Page 16
B10
X,
B10
X Plus
16
www.profoto.com
Attach the stand adapter
Attach the stand adapter to the stand adapter attachment point [5] on
the B10X/B10X Plus.
1. Before attaching, observe that the alignment pin [18] on the stand
adapter, fits into alignment pint hole [4] on the B10X/B10X Plus.
2. Tighten the attachment screw [19] with the attachment screw
wheel [17] until the stand adapter sits firm.