Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 54)

54
MAINTENANCE
This menu is used to perform maintenance of the unit.
MODEL INFO
Displays model information about the unit.
MODEL
S/NO
VERSION
UPDATE MODE
To permit access to the unit from a PC, set UPDATE
MODE to ON. Enable update mode when backing up or
restoring settings, or using the setup software RM-IP
Setup Tool.
When UPDATE MODE is set to ON, all operations are
disabled, except the VALUE knob and VALUE button
operation.
To return to normal operation mode, set UPDATE
MODE to OFF.
For details, see “Using a Setup PC” (page 26).
Note
When UPDATE MODE is set to ON, the buttons on the
control panel blink at roughly 1-second intervals.
Blinking indicates that external access to the unit is
permitted. It does not indicate a malfunction.
RESET
Resets all settings stored on the unit to their default
values.
For details, see “Restoring Factory Default Settings”
(page 43).
SENSITIVITY
Sets the operational sensitivity of the joystick to pan or
tilt the camera.
Display Description
RM-IP500 Displays the model name of the unit.
Display Description
1234567 Displays the serial number of the unit.
Display Description
X.XX Displays the firmware version of the
unit.
Settings (Bold:
default value) Description
1, 2, 3, 4, 5 The larger number you select, the
higher the sensitivity will be.