Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 44)

44
Default values
The state of each control block on the control panel is
given below.
• The ACTIVE button is on (button is lit) on the color
adjustment block, lens control block, and preset
memory control block.
• The DIRECT RECALL button is on (button is lit) on
the preset memory control block.
• The CAMERA 1 button is on (button is lit yellow) on
the camera selection block. “1” (group number 1) is
displayed in the group number display.
• The RM menu button is on (button is lit) in the menu
control block, and the top menu is displayed on the
LCD panel.
All camera information in the camera table is cleared,
and the settings for camera information items are
undefined.
The settings of all setup items in the RM menu are
returned to their default values, shown in the following
table.
* Default value of 50 for models sold in China.
Menu item Sub menu item Setup item Default value
OPERATION PRESET SPEED 24
CONFIG RM SETUP AE CONFIG MANUAL
CAM POWER EACH
ZOOM LEVER
CAMERA
FREQ 59.94*
LCD BRIGHT 5
LAMP
DIMMER 5
SW ASSIGN ASSIGN1 BACKLIGHT
ASSIGN2 FLICKER
ASSIGN3 STATUS
ASSIGN4 DETAIL
ASSIGN5 KNEE
ASSIGN6 AE LEVEL
DIRECTION JOYSTICK PAN STANDARD
JOYSTICK TILT STANDARD
ZOOM LEVER
STANDARD
FOCUS DIAL STANDARD
GPI I/O SETTING INPUT
TALLY MODE NORMAL
COMMAND
SEL STANDARD
CAMERA LINK ON
LAN IP 192.168.0.10
SM 255.255.255.0
GW 0.0.0.0
SERIAL BAUD RATE 9600
CONTROL I/F LAN
AUTO IP SETUP SETUP IP [FROM] IP 192.168.0.1
[TO] IP 192.168.0.254
ASSIGN CAM [FROM]
GROUP NUM 01
[FROM]
CAMERA NUM 01
MAINTENANCE JOYSTICK SENSITIVITY 5