Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 37)

37
Changing the speed of movement
between positions
1
Check that the DIRECT RECALL button is
off.
Turn it off if it is currently turned on.
2
Select a camera, and recall the position you
want to change.
3
Set the speed using OPERATION >OTHER
>PRST SPEED in the RM menu.
4
Press and hold the STORE button.
Note
Subsequently when a preset is stored, the speed of
movement between positions changes to the value set in
step
3 .
Recording the Pan/Tilt/
Zoom Operation of a
Camera (Trace Function)
This function records the pan/tilt/zoom operation of a
camera in order to reproduce (trace) those actions later
as required.
The BRC-X1000 and BRC-H800 cameras with
firmware version 2.0 or later support this function.
Up to 16 patterns can be recorded.
Recording the pan/tilt/zoom
operation
1
Press the ACTIVE buttons, turning them on
(buttons are lit), on the joystick control
block and preset memory control block.
2
Select the camera whose status you want
to store.
For details about selecting a camera, see “Selecting
a Camera” (page 29).
Note
If “PRST:MODE1” or “PRST:MODE2” is
displayed at the bottom of the LCD panel, press an
assign button to change the preset mode to TRACE.
Each time you press an assign button, the preset
mode switches between MODE1/MODE2 and
TRACE. TRACE is selected when
“PRST:TRACE” is displayed.
For details about function assignments to assign
buttons, see “Assigning Functions to Assign
Buttons” (page 40).
5 1
6
1
7
Direct recall
Number
recall