Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 13)

13
Typical RM menu operation
1
Press the RM MENU button, turning it on
(button is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor
to the desired item to set.
The cursor moves up/down as the SELECT knob is
turned.
3
Press the SELECT button.
The menu for the selected item appears.
4
Turn the SELECT knob to move the cursor
to the desired setup menu item.
The cursor moves up/down as the SELECT knob is
turned.
5
Press the SELECT button.
The selected menu item and its setup items appear.
6
Turn the SELECT knob to move the cursor
to the desired item.
The cursor moves up/down as the SELECT knob is
turned.
7
Turn the VALUE knob to select the setting.
For items that require confirmation about the
setting is changed, the current selection is displayed
highlighted.
The highlight display disappears when the change
is confirmed.
To configure items in other menus
Press the CANCEL button to return to the parent item in
the menu, and then use the same procedure.
To save a setting in the unit
Press the VALUE button after adjusting the setting.
2~7
1
Cursor
Cursor
Cursor