Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 39)

39
Operating the Camera
Setup Menu from the
Unit (Camera Menu
Operation Mode)
You can operate the setup menu on the camera using the
knobs and buttons on the menu control block and the
joystick.
Notes
• In camera menu operation mode, the menu is
displayed on the monitor output of the camera.
Nothing is displayed on the LCD panel of the unit.
• Operation according to the camera specifications is
required to save settings.
Buttons and knobs used for camera
menu operations
* For details about items saved with a preset number, refer to
the operating instructions of each camera.
1
Select the target camera to control.
For details about selection, see “Selecting a
Camera” (page 29).
2
Press and hold the CAM MENU button,
turning it on (button is lit yellow).
Camera menu operation mode is activated.
The camera setup menu is displayed on the output
video monitor for the camera on-screen display.
3
Operate the camera setup menu using the
SELECT knob/button, VALUE knob,
CANCEL button, and joystick.
SELECT knob
Selects menu items.
The cursor moves up/down as the SELECT knob is
turned counterclockwise/clockwise.
SELECT button (or VALUE button)
Press this button to confirm the selection of menu
items.
If a menu item has sub items, those sub items are
displayed.
VALUE knob
Selects settings.
The setting changes as the VALUE knob is turned
counterclockwise/clockwise.
CANCEL button
Press this button to go back one level in the menu
and to exit the setup menu.
Note
On the SRG series or BRC-X400/X401, pressing
the CANCEL button during menu operation will
exit menu mode. To go up one level in the menu,
press and hold the CAM MENU button.
Operation using the joystick
Select a setup menu item using tilt operation, and
select the setting using pan operation.
Operation Buttons and knobs used
Activate camera
menu mode. Press and hold the CAM MENU button.
Select a setup
menu item. Turn the SELECT knob or tilt up/down using
the joystick.
Confirm the
setup menu
item selection. Press the SELECT button or the joystick
button.
Select a setup
menu sub item. Turn the SELECT knob or pan left/right using
the joystick.
Change the
setting of the
setup menu sub
item. Turn the VALUE knob or press the joystick
button.
Confirm the
changed setting.
Save settings. Saved on the camera using the camera preset
memory function.*
Go back one
level in the
menu. Press and hold the CAM MENU button or
press the CANCEL button.
3
2