iSys iTerra IJ1800 - Manual (Page 41)

Page 41
STEP 11.9
Functionality – The Advanced Tab
The third tab labelled „Advanced‟ allows the user to apply some
maintenance functions to the printer.
Align Printhead – Aligns the printheads so colors register correctly
Clean Pens – Used when print nozzles appear clogged
Media Calibration – Calibrates to a media thickness so plot lengths are
correct
Align printheads and clean pens are fairly simple functions and
basically only require that there is media present.
Media calibration requires a 3 step process:
1)
Print a plot
2) Scan the plot
3) Reset the rear paper feed path
Note: The „Media Calibration‟ button does not respond immediately
and usually takes 10 seconds to retrieve data from the printer. If the
data has been retrieved correctly the button will turn green.