iSys iTerra IJ1800 - Manual (Page 12)

Page 12
7 Installing the Printheads
STEP 7.1 STEP 7.2
Open the second hinged flap at the right.
The print carriage will move to the left,
then back to the right. Wait for it to stop.
Wait 30 seconds before opening the
printhead cover A.
STEP 7.3 STEP 7.4
Pull the printhead cover up and towards
the front.
The hook at the front should unlatch
itself. Lift the printhead cover back.
STEP 7.5 STEP 7.6
Unpack the printheads and remove the
protective tapes.
Lift the small handle on the top of the
printhead then match the color of the
printheads to the slot in the printer.