iSys iTerra IJ1800 - Manual (Page 10)

Page 10
5 Removal of Printer Packaging
STEP 5.1 STEP 5.2
Open the hinged flaps on the right side of
the printer. Remove the foam packaging. Close the hinged flaps at the right of the
printer.
STEP 5.3 STEP 5.4
Insert the power cable into the printer
and then, into the power socket. Wait 15
seconds before turning on the printer.
Press the Power key to switch the printer
on.
STEP 5.5
The front panel and yellow light will start
to flash. Wait until the timer icon
disappears.